21 ut0 metal circular connector description ?ut0? industrial circular connectors are a range of multiway connectors available in 8 shell sizes and 8 insert arrangements all intermateable, interchangeable and intermountable with the trim trio ?utg? and ?utp industrial connector families. ?ut0? is equipped with identical shells from military connectors complying to mil-c-26482 spec. strong and rugged built to resist every environmental and mechanical requirement for indoor and outdoor applications. amongst several characteristics, ?ut0? offers possibilities on: shielding, high levels on sealing and salt spray. ut0 is also the perfect solution to connect cat5e ethernet applications in combination with other signals, using the same trim trio contacts (consult factory for more info). features and benefits (see p2) suitable for shielding applications available in 8 shell sizes and 8 insert arrangements. available in plug and receptacle versions for both male and female contacts. different insert orientations possible. plastic inserts with flammability rating: ul94-v0. 2 levels of water protection: dynamic ip67 and ip68 both versions are ip69k 2 levels of salt spray: 48h and 96h higher salt spray resistance (200/500h) upon request cat5e ethernet compatible. can be combined with other signals offering the advantage to use same contacts (consult factory). ul recognition in process. metal bayonet ring: - metal wave spring loaded - locks with audible positive ?click? - assures 500 matings and unmatings rohs compliant performance characteristics operating temp: -40c to +105c insulation resistance: 5000 m min. test potential: 2000 vac durability: 500 matings and unmatings. vibration per mil-std202 resistance: method 204 thermal shock: per mil-std202 method 207 corrosion: salt spray per mil-std 202 method 101 48h (standard version) 96h (black anodised coupling ring) higher salt spray resistance (200/500h) upon request shielding effectiveness: 95 db at 1 mhz degree of water protection per din 40050: dynamic ip67 / ip68 / ip69k in mated condition and in combination with sealed back shell. how to order ? ? ? ? h or h6 h ? ? p s 12 12 14 14 0 6 ut0 ut0 body variation: 0 : wall mounting receptacle 6 : cable plug 7 : jam nut receptacle for rear panel mounting shell size: insert arrangement: type of contacts: p : pin contacts s : socket contacts insert polarisation: no letter : standard version w, x, y, z: different orientations (consult factory) application: h : standard version, water protected ip 67 & ip 69k h6 : water protected ip 68 & ip 69k (only needed for wall mounting & jam nut receptacles) design variation: no letter : standard version others : special versions plating: no letter : standard is nickel plating (48h salt spray) 01: black anodised jam nut (96h salt spray) 02: black anodised coupling ring (96h salt spray) new construction shells: zinc alloy backshells and cable glands: brass coupling ring: aluminium alloy coupling spring: spring stainless steel insert: glass-filled thermoplast ul94-v0 rohs compliant contact accommodation ?ut0? connectors accept trim trio size 16 crimp-type removable snap-lock contacts (see contacts section) contacts to be ordered seperately. dynamic i p68 / ip69k high salt spray resistance rohs compliant
2 new ut0 - ut0w series new ut0 ? ut0w series: the exclusive new product range in the trim trio broadline. aesthetic and top class performances ut0 ? ut0w series major technical features & benefits for detailed information on ut0 and ut0w series offering see pages 21 to 31 full metal bayonet connector ? enabling 500 mating-unmating without wear out ? secure locking device: audible ?click? when mating in accordance with following standards ? ut0 is ethernet cat5e compatible (consult factory) ? uto-utow ranges are upgradeable to highspeed solutions rohs compliant ? cadmium and lead free materials are used high salt spray resistance* ? can be used in severe environment * exists in 48 and 96 hours salt spray version * higher salt spray resistance (e.g. 200 or 500 hours) upon request dynamic ip68* connector will remain ip68 even when: ? pulling on the cable ? bending the cable * with appropriate back shell * exists also in ip67 version dynamic ip69k* connector withstands high pressure water cleaning. * with appropriate back shell new ut0-ut0w series
22 ut0 cable plug for pin contacts (ut06- - - -ph) part number shell ? a 0.2 b max. ? c 0.15 ? d 0.15 e 0.25 size ut06104ph 10 21.80 10.2 20.00 ut06128ph 12 26.10 13.4 23.60 ut061412ph 14 29.30 16.7 26.80 23.25 ut061619ph 16 32.45 33.00 19.7 30.00 ut061823ph 18 35.25 21.7 33.30 ut062028ph 20 38.80 24.9 36.55 ut062235ph 22 42.00 28.1 39.50 25.20 ut062448ph 24 45.05 31.2 42.60 cable plug for socket contacts (ut06- - - -sh) part number shell ? a 0.2 b max. ? c 0.15 ? d 0.15 e 0.25 size ut06104sh 10 21.80 10.2 20.00 ut06128sh 12 26.10 13.4 23.60 ut061412sh 14 29.30 33.00 16.7 26.80 23.25 ut061619sh 16 32.45 19.7 30.00 ut061823sh 18 35.25 21.7 33.30 ut062028sh 20 38.80 24.9 36.55 ut062235sh 22 42.00 27.30 28.1 39.50 25.20 ut062448sh 24 45.05 31.2 42.60 part numbers are suitable for both ip67 and ip68 water protection for 96h salt spray version add ?02? behind ?h? e.g. ut061412ph02 (only bayonet ring will be black anodised) part numbers are suitable for both ip67 and ip68 water protection for 96h salt spray version add ?02? behind ?h? e.g. ut061412sh02 (only bayonet ring will be black anodised) new e 0,25 e 0,25 dynamic i p68 / ip69k high salt spray resistance rohs compliant
23 ut0 wall mounting receptacle for pin contacts (ut00----ph/ph6) wall mounting receptacle for socket contacts (ut00---- sh/sh6) part number ip67 ip68 shell size a max. b 0.3 c 0.2 ? d 0.15 e 0.25 f 0.25 ? g 0.1 ? h 0.1 ? j 0.1 ut00104ph ut00104ph6 10 33.23 1.6 11.35 15.0 18.3 23.8 3.2 17 . 3 14 . 2 ut00128ph ut00128ph6 12 19.0 20.6 26.2 21.8 18.4 ut001412ph ut001412ph6 14 22.2 23.0 28.6 25.0 21.5 ut001619ph ut001619ph6 16 25.3 24.6 31.0 28.1 24.6 ut001823ph ut001823ph6 18 28.5 26.9 33.3 31.3 27.8 ut002028ph ut002028ph6 20 34.75 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9 ut002235ph ut002235ph6 22 34.9 31.8 39.7 37.7 34.1 ut002448ph ut002448ph6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3 part numbers are suitable for both 48h and 96h salt spray. a square sealing has to be ordered separately to guarantee a sealing with equipment. refer to ?circular accessories? section (u tfd--). part numbers are suitable for both 48h and 96h salt spray. a square sealing has to be ordered separately to guarantee a sealing with equipment. refer to ?circular accessories? section (u tfd--). part number ip67 ip68 shell size a max. b 0.3 c 0.2 ? d 0.15 e 0.25 f 0.25 ? g 0.1 ? h 0.1 ? j 0.1 ut00104sh ut00104sh6 10 25.20 1.6 11.35 15.0 18.3 23.8 3.2 17 . 3 14 . 2 ut00128sh ut00128sh6 12 19.0 20.6 26.2 21.8 18.4 ut001412sh ut001412sh6 14 22.2 23.0 28.6 25.0 21.5 ut001619sh ut001619sh6 16 25.3 24.6 31.0 28.1 24.6 ut001823sh ut001823sh6 18 28.5 26.9 33.3 31.3 27.8 ut002028sh ut002028sh6 20 29.00 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9 ut002235sh ut002235sh6 22 34.9 31.8 39.7 37.7 34.1 ut002448sh ut002448sh6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3 new b 0,3 b 0,3 ? g 0,1 dynamic i p68 / ip69k high salt spray resistance rohs compliant
24 ut0 jam nut receptacle for pin contacts (ut07----ph/ph6) - suitable for rear panel mounting jam nut receptacle for socket contacts (ut07--- sh/sh6) - suitable for rear panel mounting part number ip67 ip68 shell size ? a 0.15 b 0.2 d max. f max. g 0.25 h 0.3 k 0.25 l 0.2 ? m 0.2 ut07104ph UT07104PH6 10 14 . 9 19.30 33.90 3.2 27.0 22.2 16.6 17.0 17.7 ut07128ph ut07128ph6 12 19.0 31.8 27.0 20.8 21.2 22.5 ut071412ph ut071412ph6 14 22.2 34.9 30.2 23.9 24.3 25.7 ut071619ph ut071619ph6 16 25.3 38.1 33.3 27.1 27.5 28.7 ut071823ph ut071823ph6 18 28.5 41.3 36.5 30.3 30.6 32.0 ut072028ph ut072028ph6 20 31.7 24.70 39.00 6.4 46.1 39.7 33.4 33.8 35.2 ut072235ph ut072235ph6 22 34.9 49.2 42.9 36.6 37.0 38.4 ut072448ph ut072448ph6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5 for 96h salt spray version add ?01? at the end of the part number e.g. ut071412ph601 (only jam nut will be black anodised) for 96h salt spray version add ?01? at the end of the part number e.g. ut071412ph601 (only jam nut will be black anodised) part number ip67 ip68 shell size ? a 0.15 b 0.2 d max. f max. g 0.25 h 0.3 k 0.25 l 0.2 ? m 0.2 ut07104sh ut07104sh6 10 14 . 9 19.30 33.00 3.2 27.0 22.2 16.6 17.0 17.7 ut07128sh ut07128sh6 12 19.0 31.8 27.0 20.8 21.2 22.5 ut071412sh ut071412sh6 14 22.2 34.9 30.2 23.9 24.3 25.7 ut071619sh ut071619sh6 16 25.3 38.1 33.3 27.1 27.5 28.7 ut071823sh ut071823sh6 18 28.5 41.3 36.5 30.3 30.6 32.0 ut072028sh ut072028sh6 20 31.7 24.70 39.00 6.4 46.1 39.7 33.4 33.8 35.2 ut072235sh ut072235sh6 22 34.9 49.2 42.9 36.6 37.0 38.4 ut072448sh ut072448sh6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5 new dynamic i p68 / ip69k high salt spray resistance rohs compliant
25 ut0 insert rotation positions the table shows possible insert rotation positions. 5 positions n,w,x,y and z differ in the degree of rotation for the various connectors sizes. the table indicates the exact degree of rotation. note: insert rotation positions are optional (consult factory) shell size contact number insert rotation positions wx y z 10 4 45 - - - 12 8 26--- 14 12 60--- 16 19 30 165 - 315 18 2 3 -158-270 20 28 79 - 259 - 22 35 13 162 198 265 24 48 60 120 189 351 new dynamic i p68 / ip69k high salt spray resistance rohs compliant extra 0-seals for wall mounting (ut00) and jam nut (ut07) receptacle connectos an extra 0-seal must be mounted on the receptacle connectors when a backshell is used. this to guarantee the ip68 sealing level part number shell size ut010rearseal 10 ut012rearseal 12 ut014rearseal 14 ut016rearseal 16 ut018rearseal 18 ut020rearseal 20 ut022rearseal 22 ut024rearseal 24
|
